Q32 Series-Rubber belt tumble type Shot blasting machine
Short Description:
Q32 series -Rubber belt tumble type Shot blasting machine
1. Summary:
Q32 series Rubber belt tumble type shot blasting machine is suitable for surface cleaning of various parts which doesn’t afraid of collision and easy to roll over.
All kinds of metal castings surface sand cleaning, black metal parts surface rust removal, stamping parts surface burrs and burrs blunt, forging and heat treatment workpiece surface and spring surface oxide removal and surface grain refinement can be achieved by the series of equipment shot blasting process.
Its application range is very wide, the main foundry, thermal treatment plant, motor factory, machine tool parts factory, bicycle parts factory, power machine, auto parts, motorcycle parts, non-ferrous metal die casting factory.
The workpiece after shot blasting can obtain good material color, and it can also become the previous process of the metal parts surface blackening, blue, passivation, etc., and at the same time, it can provide a good base for electroplating, painting and finishing.
After shot blasting, the tensile stress of the workpiece can be reduced, and the surface grain can be refined, so as to strengthen the surface of the workpiece and increase its service life.
Rubber belt tumble type (Crawler-type) shot blasting machine has low noise, less dust, high production efficiency, and the shot can be automatically recycled, less material consumption, low cost, which is the ideal surface treatment equipment for modern enterprises.
2. Main structure:
Q32 tumble belt shot blasting machine is mainly composed of shot blasting device, shot blasting chamber, shot sand lifting separation mechanism, dust removal mechanism, electrical control system, etc. High chromium and wear-resistant cast iron are used as lining board in the inner cavity, blade and interior wall of the shot blasting machine to improve the service life.
3. Workpiece principle:
The “Shot sand lifting and separating mechanism” will separate the shot, broken shot and dust to obtain qualified projectiles.
The shot will enter the high-speed rotating shot parting wheel and rotate together with it by the self-weight shot blasting chute.
Under the action of centrifugal force, the projectile will enter the directional sleeve and be thrown out in the rectangular window of the directional sleeve to reach the high-speed rotating blade, and the projectile will accelerate from inside to outside on the blade surface. Finally, the workpiece is fan-shaped at a certain linear speed, so that the surface of the workpiece is cleaned by shot blasting.
When the track in the shot blasting room rotates forward, it drives the workpiece to roll, so that all the workpiece in the shot blasting room and all the surfaces of the workpiece can be cleaned by shot blasting.
At the same time, the shot sand returns to the lifting separation mechanism, and is recycled after separation, and the workpiece is poured out when the track is reversed.
The main function of the dust removal mechanism is to participate in the lifting of the separation mechanism of the shot sand separation and the dust generated in the process of dust blasting.
4. Installation:
When installing, it can be placed on the horizontal concrete floor in the selected position.
When connecting the power supply, the first line to check the loose fasteners, if found loose should be tightened.
Switch on the power supply, first test run, check the rotation direction of each motor, such as the reverse phase sequence.
After the test run, it is determined that all parts are in normal operation, and then it can be put into use.
