Manufactur standard Rim Turn Table Shot Blasting Machine - Tumble Belt Shot Blasting Machine – Binhai Jincheng

Tumble Belt Shot Blasting Machine

This series machine are suitable for surface cleaning and strengthening of
medium or small size castings
forge pieces
variety of hardware
Metal stamping
And other small size metal workpieces.

For different production capacity, machine can work alone or work together in a line.

Tumble Belt Shot Blasting Machine technical Parameters

Tumble Belt Shot Blasting Machine each part character 

1. Blast wheel motor
Use ABB motor or China brand, good sealing, good
dynamic balance, stable and reliable
performance.

2. Blast chamber
Welded with all manganese steel.
The top is equipped with a three-layer sealing structure toprevent the steel shot fromleaking.
wear resistant rubber tracks,with fascia,make the workpiece easy rolling.

3.Turbine
Belt connection centrifugal type blast wheel, more stable and uniform speed. High impeller rotate speed 3000r/min

1.impeller rotation speed is 3000r/min
2.Rejection speed:80m/s,other supplier’s speed only 72-74m/s
3.Inner structure is tight,reliable and low noise
4.Top,side protect board are use special structure, partial thickness is 70mm,with much better wear resistance
5.QBH037 blast wheel use Japan Sinto technical, cantilever centrifugal type,with big impact force,with much more better cleaning and strengthen effect. Can improve 15% work efficiency than other same power blast wheel.
Easy accessibility and easy replacement of the blades

4.Separation system
Air flow separator
With air flow generated by a wind turbine, metal shot is recycled in hopper, crushed shots are expelled from waste pipe, dust is taken to dust-collector.

Pulse bag-type dust collector
Dust collector
Centrifugal fan
Collection Pipe
Two-stage dust collecting mode:
Primary dust collecting,the settling chamber is an aerodynamically inertial settling chamber, which can achieve effective settlement of the projectile without pressure loss.
The secondary dust removal is bag filter. The dust collector is a pulse back flushing system. It has low filtering wind speed, high filtration precision, and good dust-cleaning effect.

6.Control Unit

Using Chint low voltage electrical components.(https://en.chint.com)
Omron PLC (Internnational Brand Q326C type without it)

Machine Advantages
1.More thicker guard board,high wear resisting cast iron
2.with frame more stronger
3.Thicker track, high content gum
4.Uniform speed
5.Small machine vibration
6.Longer life time
7.Especially widely used
8.4-5 levels efficiency for your choose
9.Best wear-resisting protective liner

After cleaning photo